without examplesFound in 1 dictionary
Mechanical Engineering and Automation- Contains about 15,000 terms related to:
- - metalwork,
- - machine parts,
- - N/C machines,
- - automated machinery,
- - means of communication,
- - optoelectronics, and other fields of mechanical engineering.
- Contains about 15,000 terms related to:
- - metalwork,
- - machine parts,
- - N/C machines,
- - automated machinery,
- - means of communication,
- - optoelectronics, and other fields of mechanical engineering.
dot marking
точечная маркировка
Examples from texts
A flashing dot marked the spot.Место было обозначено мигающей точкой.DeChancie, John / Castle KidnappedДе Ченси, Джон / Замок похищенныйЗамок похищенныйДе Ченси, ДжонCastle KidnappedDeChancie, John© 1989 by John DeChancie
On FIG. 1, the typical trajectories of the eye are pictured at the time of sight stabilization while focusing on the point of the object. Areas of fixations 1 are marked with dotted lines.На фиг.1 изображены типичные траектории глаза во время 20 стабилизации взгляда при рассматривании точки объекта - зоны фиксаций 1 (выделены штрих-пунктирными линиями).http://www.patentlens.net/ 11.11.2011http://www.patentlens.net/ 11.11.2011
Again, only four (a different four) points of the same degree touch the parallel trendlines (marked with dots). The two that do not touch either one of the trendlines are marked with an "x".Как и на предыдущей диаграмме, только четыре (но уже другие четыре) из шести задающих Импульс точек одного и того же Порядка касаются верхней и нижней линий тренда.Neely, Glenn / Mastering Elliott WaveНили, Гленн / Мастерство анализа Волн ЭллиотаМастерство анализа Волн ЭллиотаНили, Гленн© 1990 by Glenn Neely© Перевод на русский язык и оформление "ИК Аналитика", 2002Mastering Elliott WaveNeely, Glenn© 1990 by Glenn Neely
Add to my dictionary
dot marking
точечная маркировка
User translations
No translations for this text yet.
Be the first to translate it!